Led Behaviors - Advantech WISE-4610 Series User Manual

 Configurations
Item
Positioning
Enable/Disable
Position Update
Period
Select Permissi-
ble GNSS System
5.1.3

LED Behaviors

 All of LEDs will automatically go OFF after 15 seconds when battery power is
used.
LED
Status
Error
RF RX
RF TX
Signal
Strength
Description
Enable or disable the GNSS module. (Default: Disable)
Time between two position fix attempts.(15 sec ~ 1 day, unit: second)
(Default: 1 hr)
Specify which GNSS signals should be processed.
Value
0
1
2
3
4
5
6
7
8
*if GPS enabled, SBAS and QZSS are also enabled by default.
Color Indication
Fast Blink
(0.2 sec ON, 0.3
sec OFF)
Green
Slow Blink
(0.2 sec ON, 1.8
sec OFF)
Fast Blink
(0.2 sec ON, 0.8
sec OFF)
Red Slow Blink
(0.2 sec ON, 2.8
sec OFF)
Off
On
Green
Off
On
Yellow
Off
On
4 Green (if Press Mem-
brane Button)
GNSS combination
(Reserved)
GPS+GLONASS (default)
GPS+Galileo
Galileo+GLONASS
GPS+Galileo+GLONASS
GPS+BeiDou
Galileo+BeiDou
GPS+Galileo+BeiDou
GLONASS+BeiDou
Behavior
Wait for connecting or connecting
Connecting and normal at work
Application errors.
Network registration timeout

 I/O error
 Low battery voltage (v <= 20%)
 Low RTC battery voltage
No error
Receiving data from Gateway
NA
Sending data to Gateway
NA
Main battery capacity
 All OFF - V <= 20 %
 1 ON - 20% < V < 40%
 2 ON - 40% <= V < 60%
 3 ON - 60% <= V < 80%
 4 ON - V >= 80%
33 WISE-4610 User Manual