Advantech WISE-4610 Series User Manual page 45

Operating
Flags
Statuses
Flags bit definitions:
Bit Content
15 OTC
14 OTD
13 BATHI
12 BATLOW
11 CHG_INH
10 RSVD
9 FC
8 CHG
7 OCVTAKEN
6 ISD
5 TDD
4 HW1
3 HW0
2 SOC1
1 SOCF
0 DSG
OTC = Over-Temperature in Charge condition is detected.
True when set
OTD = Over-Temperature in Discharge condition is
detected. True when set
BATHI = Battery High bit indicating a high battery voltage
condition.
BATLOW = Battery Low bit indicating a low battery volt-
age condition.
CHG_INH = Charge Inhibit indicates the temperature is
outside the range [Charge Inhibit Temp Low, Charge
Inhibit Temp High]. True when set
FC = Full-charged condition reached (RMFCC=1; Set
FC_Set%=-1% when RMFCC=0). True when set
CHG = (Fast) charging allowed. True when set
OCVTAKEN = Cleared on entry to relax mode and set to 1
when OCV measurement is performed in relax.
ISD = Internal Short is detected. True when set.
TDD = Tab Disconnect is detected. True when set.
HW[1:0] Device Identification. Default is 01
SOC1 = State-of-Charge-Threshold 1 (SOC1 Set)
reached. True when set
SOCF = State-of-Charge-Threshold Final (SOCF Set %)
reached. True when set
DSG = Discharging detected. True when set
35 WISE-4610 User Manual