I/O Module Wiring - Advantech ADAM-6300 Series User Manual

2.3

I/O Module Wiring

A plug-in screw terminal block is used for the interface between I/O modules and field
devices. The following information must be considered when connecting electrical
devices to I/O modules.
The terminal block accepts Wire Size #16~28 AWG (stripped length: 6.5 mm)

Always use a continuous length of wire; do not combine wires

Use the shortest possible wire length

Use wire trays for routing where possible

Avoid running wires near high-energy wiring

Avoid running input wiring proximal to output wiring

Avoid creating sharp bends in the wires

Note! The wires should be at least 2 mm in diameter.
7 ADAM-6300 User Manual