To Test The U4164A Module; To Clean The Module - Keysight Technologies U4164A Service Manual

To test the U4164A module

The U4164A logic analyzer module does not require an operational accuracy calibration or
adjustment. After installing the module, you can test and use the module.
•
•
•

To clean the module

•
•
Keysight U4164A Logic Analyzer Service Guide
If you require a test to verify logic analyzer's performance with the specifications, see
U4164A Performance" on page 19.
If you require a test to verify correct module operation, see
If the module does not operate correctly, see
With the AXIe chassis turned off and unplugged, use a cloth moistened with a mixture of mild
detergent and water to clean the front panel of the module.
Do not attempt to clean the module's circuit board.
Preparing for Troubleshooting or Performance Testing
"To run the self tests"
"Troubleshooting" on page 53.
2
"Testing
on page 58.
17