IFM1F and IFM2F LEDs
The IFM1F and IFM2F LEDs indicate errors on the first or second synchronization module.
Table 3- 6
Possible states of the IFM1F and IFM2F LEDs
LED
IFM1F
IFM2F
Lit
Irrelevant
Irrelevant
Lit
LINK and RX/TX LEDs
The LINK and RX/TX LEDs indicate the current state of the PROFINET IO interfaces.
Table 3- 7
Possible states of the LINK and RX/TX LEDs
LED
LINK
RX/TX
Lit
Irrelevant
Irrelevant
Flashes
6 Hz
Note
The LINK and RX/TX LEDs are located directly next to the sockets of the PROFINET IO
interfaces. They are not labeled.
REDF LED
The REDF LED indicates specific system states and redundancy errors.
Table 3- 8
Possible states of the REDF LED
REDF LED
System state
Flashes
Link-up
0.5 Hz
Flashes
Update
2 Hz
CPU 410 Process Automation/CPU 410 SMART
System Manual, 05/2017, A5E31622160-AC
Meaning
An error was detected on synchronization module 1.
An error was detected on synchronization module 2
Meaning
Connection at the PROFINET IO interface is active
Receiving or sending data at the PROFINET IO interface.
Configuration of the CPU 410
3.3 Status and error displays
Basic requirements
-
-
43