Siemens SIMATIC CPU 410 System Manual page 137

CEF parameter
Connection parameters
(optional)
Status (optional)
Note
You can request the details of specific encodings from Customer Support.
Events
The following table provides an overview of the individual events.
Security Event
event ID
3 SE_NETWORK_SUCCESSFUL_LOGON
4 SE_NETWORK_UNSUCCESSFUL_LOGON
CPU 410 Process Automation/CPU 410 SMART
System Manual, 05/2017, A5E31622160-AC
Key name Meaning
The following parameters are summarized under the term "Connection
parameters":
Connection_id, Session ID
•
Protocol
•
Application protocol
•
Connection type
•
Gateway session ID
•
Source addresses
•
– Source IP address
– Source MAC address
– SourcePort
– Source tsap id
– Source subnet id
– Source Profibus address
– Source C-bus rack number
– Source C-bus slot number
Destination addresses
•
– Destination IP address
– Destination MAC address
– Destination port
– Destination tsap id
– Destination subnet id
– Destination Profibus address
– Destination K bus rack number
– Destination C-bus slot number
status Contains the number of overwritten unsent security events
Security Event Severity meaning
Connection established with correct authentication
Error occurred during logon.
Incorrect password or logon not currently possible (due to
AaA)
Special functions of the CPU 410
9.3 Security event logging
137