Preface - Siemens SIMATIC CPU 410 System Manual

Preface

1.1 Preface
Purpose of this manual
The information in this manual enables you to look up operator inputs, function descriptions
and technical specifications of the CPU 410-5H Process Automation, CPU 410E Process
Automation and CPU 410 SMART.
For information on installing and wiring this and other modules in order to set up an
automation system, refer to Manual
Changes compared with the previous version
Changes compared with the previous version of the SIMATIC PCS 7 Process Control
System CPU 410-5H Process Automation/CPU 410 SMART, 09/2014 edition
(A5E32631620-AB):
● CPU 410E has been added.
● The connection of redundant I/O via the PROFINET interface is described.
● The "Configuration changes during operation" functionality via the PROFINET interface is
described.
● The "Configuration changes during redundant operation" functionality via the PROFINET
interface is described.
● The retentive load memory is described.
● A two-step firmware update procedure is described.
● Time synchronization for purposes of time stamping via PROFINET is described.
● The signaling of security events via SysLog is described.
Scope of the manual
The manual is relevant to the following components:
● CPU 410-5H Process Automation; 6ES7 410-5HX08-0AB0 as of Firmware Version V8.2
● CPU 410E Process Automation; 6ES7410-5HM08-0AB0 as of Firmware Version V8.2
● CPU 410 SMART; 6ES7 410-5HN08-0AB0 as of firmware version V8.2
CPU 410 Process Automation/CPU 410 SMART
System Manual, 05/2017, A5E31622160-AC
Automation System S7-400, Hardware and Installation
1
.
17