Debugger Or Diagnostic Directories; Keyboard Control - Motorola MVME167 Series Installation Manual

Debugger or Diagnostic Directories

When using 167Bug, you operate out of either the debugger
directory or the diagnostic directory.
If you are in ...
The debugger directory
The diagnostic directory
You may switch between directories by using the Switch
Directories (SD) command.
You may examine the commands in the current directory by using
the Help (HE) command.

Keyboard Control

167Bug is command-driven; it performs its various operations in
response to user commands entered at the keyboard. When you
enter a command, 167Bug executes the command and the
prompt reappears. However, if you enter a command that causes
execution of user target code (e.g., "GO"), then control may or may
not return to 167Bug, depending on the outcome of the user
program.
Introduction to MVME167Bug
With the
You have available ...
prompt ...
All of the debugger
167-Bug>
commands
All of the diagnostic
167-Diag>
commands as well as
all of the debugger
commands
4
167-Bug>
4-3