Introduction; Pancam; General Features; Pancam-C Features - ITS Telecom PanCam-C Installation And Programming Manual

1

Introduction

ITS offers a wide range of Access Control Door Phones for
indoor and outdoor entry control. These solutions range from
the simplest one button unit to the most sophisticated unit with
a full keypad and built-in camera to monitor visitors at the
entrance. All of ITS's Access Control Door Phones
incorporate cutting edge technology providing a high quality
speakerphone and a built in electric lock control. All ITS's
Access Control Door Phones are easy to set-up, modern and
durable in design and provide "plug and play" installation.
This guide provides installation and programming instructions
for the following products:
PanCam Outdoor unit
Pantel Outdoor unit
Pantel Indoor unit
Pancode Outdoor unit
Pancode Indoor unit
1.1

PanCam

The PanCam unit is available in two versions: PanCam-C
(with keypad) and PanCam-T (one button). Both are wall
mounted access control door phones, connected to an analog
port of a PBX or a Key Telephone System, with an internal
black & white or color high-quality pinhole camera encased
within the unit. It is also possible to connect an external
camera. Both, PanCam-C and T, are compatible with most
known telephone systems and PBX types.
1.1.1

General Features

The PanCam controls the camera, providing four different
modes of operation:
Always on
Always off
Powered by pressing any button
Powered by pressing the call button
1.1.2

PanCam-C Features

The outdoor PanCam-C unit has the following features:
Direct dialing to any extension
Speed-dial to internal or external subscribers
Automatic Busy & Disconnect Cadence Detection
Door opening from any extension
Programmable day and night destinations
PanCam/Pantel/Pancode Installation and Programming Manual 1