ITS Telecom PanCam-C Installation And Programming Manual page 20

Hide thumbs Also See for PanCam-C:
Table of Contents

Advertisement

OPERATION
Assigning a
Speed-dial
destination
number.
This command
must be entered
separately for
each X value
Cancelling a
Speed-dial
destination
number.
This command
must be entered
separately for
each X value
Assigning
Destination
Numbers (DN) to
Day, Night and
Error. This
command must be
entered separately
for each X value.
The Day/Night
DN will be dialed
when the
button is pressed,
respective to
Day/Night mode.
The Error DN is
dialed after
receiving three
invalid Access
Code entries in a
row
18 PanCam/Pantel/Pancode Installation and Programming Manual
PBX Parameter Commands
*120 + X + DN + #
X = a digit 1 through 9
DN = Destination
number (DN) = Up to
20 digits, including *, #,
Pause, and A-D
characters.
For special character
input, see section 3.6
Entering Special
Characters DTMF.
*120 + X + #
X = a digit 1 through 9
*360 + X + DN + #
where:
X = 1 Day
X = 2 Night
X = 3 Error
Destination number
(DN) = Up to 20 digits,
including *, #, Pause,
and A-D characters. For
special character input,
see section 3.6 Entering
Call
Special Characters
DTMF.
COMMAND
Programming
DEFAULT
No default
No default
Day = 0
Night = 0
Error =
No default

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PanCam-C and is the answer not in the manual?

This manual is also suitable for:

Pancam-tPantelPancode

Table of Contents