Ip Sec; Configuring Ip Sec; System Administrator Guide - Xerox B1025 System Administrator Manual

Security

IP Sec

Internet Protocol Security (IP Sec) is a group of protocols used to secure Internet Protocol (IP)
communications. The IP Sec feature authenticates and encrypts each IP data packet.
If you select IP Sec, all printer traffic uses IP Sec protocols, including:
• DHCP v4/v6 (TCP and UDP)
• DNS (TCP and UDP)
• FTP (TCP)
• HTTP (Scan Out, TCP port 80)
• HTTPS (Scan Out, TCP port 443)
• HTTPS (Web Server, TCP port 443)
• ICMP v4/v6
C C o o n n f f i i g g u u r r i i n n g g I I P P S S e e c c
1. In Xerox ® CentreWare
2. Click IP Sec.
3. To enable the protocol, for Protocol, select Enabled.
4. To remove IP Sec connections, click Flush All IP Sec Connections.
5. For Shared Secret, enter the shared key value.
6. For Verify Shared Secret, reenter the shared key value.
7. To save the new shared key, select Select to save new Shared Secret.
8. Click Apply.
50 Xerox ® B1025 Multifunction Printer

System Administrator Guide

® Internet Services, click Properties→Security.
• IPP (TCP port 631)
• LPR Print (TCP port 515)
• Port 9100 Print (TCP port 9100)
• SMTP (TCP/UDP port 25)
• SNMP (TCP/UDP port 161)
• SNMP Traps (TCP/UDP port 162)
• WS-Discovery (UDP port 3702)