Xerox B1025 System Administrator Manual page 22

Network Connectivity
• To configure the printer to assign itself an address if a DHCP server does not provide one, for
Self-Assigned Address, select Enabled.
• To allow users to see and connect to the printer using Bonjour, for Multicast DNS, select
Enabled.
10. Click Apply.
C C o o n n f f i i g g u u r r i i n n g g I I P P v v 6 6
IPv6 hosts can automatically configure themselves when connected to a routed IPv6 network using
the Internet Control Message Protocol Version 6 (ICMPv6). ICMPv6 performs error reporting for IP
along with other diagnostic functions. When first connected to a network, a host sends a link-local
multicast router solicitation request for configuration parameters. If suitably configured, routers
respond to this request with a router advertisement packet containing network-layer configuration
parameters.
1. In Xerox CentreWare
®
2. Click TCP/IP.
3. To enable TCP/IPv6, for Protocol, select Enabled.
4. For Default Dynamic Host Configuration Protocol, select how DHCP operates forIPv6.
5. To specify an address manually, perform the following steps.
• For Manual Address, select Enabled.
• Select a Router Prefix from the menu, or to populate the prefix for manual entry address, click
Add.
6. To configure DNSv6, perform the following steps.
• Enter a valid IPv6 Domain Name.
• For Primary DNSv6 Server Address, enter an IP address.
• For Secondary DNSv6 Server Address, enter an IP address.
• To enable Dynamic DNSv6 Registration, select Enable.
7. Click Apply.
22 Xerox ® B1025 Multifunction Printer
System Administrator Guide
Internet Services, click Properties→Connectivity→Protocols.
®