Secure Http (Tls); Enabling Https (Tls) - Xerox B1025 System Administrator Manual

Security

Secure HTTP (TLS)

To establish an HTTP Secure (HTTPS) connection to the printer, you can use TLS to encrypt data sent
over HTTP.
You can enable TLS encryption for the following features.
• Configuring the printer in Xerox
• Printing from Xerox
• Printing using IPP
Note: TLS encryption is protocol-independent. You can choose to use, or not to use TLS for each
protocol.
Before you begin:
• Ensure that DNS is enabled and configured.
• Ensure that the date and time configured on the printer is correct. The time that is set on the
printer is used to set the start time for the Xerox
installed when you enable HTTP (TLS). After you enable HTTP (TLS), check the device certificate.
E E n n a a b b l l i i n n g g H H T T T T P P S S ( ( T T L L S S ) )
1. In Xerox ® CentreWare
2. Click HTTP.
3. To enable the protocol, for Protocol, select Enable.
4. For Keep Alive Timeout, enter the time that the printer waits for a response from a connected
user before it terminates the connection.
5. Change the Port Number as needed.
6. If a Machine Digital Certificate is configured, you can edit the following security fields.
a. For HTTP Security Mode, select an HTTPS security option.
b. To allow connections to the device using HTTPS only, for HTTP Security Mode, select Require
HTTPS.
c. To enable one or more versions of TLS, for TLSv 1.0, TLSv 1.1, and TLSv 1.2, select Enable as
needed.
7. Click Apply, then click the OK button.
48 Xerox ® B1025 Multifunction Printer
System Administrator Guide
® CentreWare
® CentreWare ® Internet Services
® Internet Services, click Properties→Connectivity→Protocols.
® Internet Services
® Device Certificate. A Xerox ® Device Certificate is