Procedure For Creating Data To Be Submitted; Creating Fdc Files (Function Option Documents) Using Winfog17 - Epson S5U1C17001C Manual

9 Creating Data to Be Submitted

9.2 Procedure for Creating Data to Be Submitted

Figure 9.2.1 shows the flowchart for creating a PA file (Data to be submitted).
9.2.1

Creating FDC Files (Function Option Documents) Using winfog17

This procedure is necessary for CPUs that require function option selection.
FDC files (Function option documents) are files in which the specific function options are selected for the target CPU. For more
information of the function options that can be selected, refer to the target CPU technical manual.
Do the following to select a function option and generate an FDC file using winfog17.exe.
(1) Launch winfog17
An FDC file will be created on the project if a project is created with a CPU requiring selection of a function option as the
target. Double-click the FDC file in Project Explorer on the IDE to launch winfog17.
If the model-specific information file (S1C17xxx.ini) was read in for the previous execution, the same file will be loaded
automatically when winfog17 is launched.
(2) Load S1C17xxx.ini
Click the [Device INI Select] button in winfog17 or select [Device INI Select] from the [Tool] menu.
Enter the filename and path in the text box in the dialog box displayed, or click the [Ref] button to load S1C17xxx.ini for the
target CPU. The S1C17xxx.ini corresponding to the specific model can be found in the folder below.
User_folder\EPSON\GNU17V3\mcu_model
If no corresponding S1C17xxx.ini exists for the target CPU, contact the Seiko Epson sales operations.
9-2
PSA file
file.psa
ROM data
SEIKO EPSON
Figure 9.2.1 PA file creation flowchart
Seiko Epson Corporation
Device information
definition file
S1C17xxx.ini
Function option
generator winfog17
Function option
file.fdc
document file
Data checker
winmdc17
PA file
file.PA (Data to be submitted)
S5U1C17001C Manual
(Rev. 1.0)