Error Message; Precautions - Epson S5U1C17001C Manual

10 Other Tools
-s
Function: Display in hexadecimal dump format
Explanation: Displays all the section information in hexadecimal dump format. Data corresponding to unresolved symbols cannot
be displayed correctly.
-D
Display disassembled contents for all sections
Function:
Explanation: Displays all the sections after disassembling the object code.
-G
Function: Display raw data of debugging information
Explanation: Displays the raw data of the debugging information in stab format.
-S
Function: Mixed display
Explanation: Displays all the executable sections after disassembling the object code. The source code is also displayed with the
corresponding disassembled code if possible.
When entering an option, you need to place one or more spaces before and after the option.
Example: c:\EPSON\GNU17V3\GCC4\objdump -S test.elf

10.1.4 Error Message

The following shows the error message generated by objdump:
/cygdrive/ X / path to objdump /objdump: filename :
File format not recognized

10.1.5 Precautions

•
The disassembled display may be aborted halfway if the amount of information is too large.
•
When a .o file before linking is dumped, the relative addresses from the beginning of each section are displayed, not the
absolute addresses. In this case the beginning of each section is address 0x0.
10-2
Table 10.1.4.1 Error message
Error message
Seiko Epson Corporation
Description
An unrecognized file ( filename ) is specified.
Specify an elf format file.
S5U1C17001C Manual
(Rev. 1.0)