Epson S5U1C17001C Manual page 4

Code No. Page
411086412 3-15 3.5.2 Executing a Build Process
3-17 3.6 Debugging the Program
3-18 3.6.2 Setting Standard Output
3-19 3.6.3 Using the Debugger
3-20 3.6.4 Setting the Debug Configuration
3-21 3.7 Files Generated in a Project by the
IDE
4-4 4.3.2 Command-line Options
4-5 4.3.2 Command-line Options
4-12 4.4.3 Method of Using Registers
5-3 5.2.3 Stack Pointer Initial Values
5-4 5.2.4 Startup Processing
7-1 7.1 Functions
7-1 7.2 Input/Output Files
7-2 7.2.1 Input Files
7-3 7.3.2 Command-line Options
8-1 8.1 Features
8-3 8.3.1 Startup Format
8-5 8.3.3 Executing Command Files
Chapter/Section Description of revision
Description revised
Build process description revised
Description revised
"Starting the Debugger" changed to "Debugging the
Program"
Entire description revised
Description revised
"Example" description revised
Description revised
"Launching the Debugger" changed to "Using the
Debugger"
Entire description revised
Description added
New description added
Description revised
Details of "Table 3.7.1 List of files generated by the
IDE" revised
Description revised
Option feature descriptions revised
Description added
The following option added:
-mrelax（gcc4 only）
Description revised
"Registers for passing arguments (%r0 to %r3)"
description revised
Description revised
Entire description revised
Description added
The following added:
The following table gives an overview of the
operations defined. For specific mounting details,
refer to the source code utility/lib_src/crt0/crt0.c
bundled with this package.
Description revised
Revised to the following:
This linker is based on the gnu linker (ld). For details
about the ld linker or method for describing linker
script, refer to the documents for the gnu linker.
Description revised
"Linker symbol file" added to flowchart
Description added
"Linker symbol file" added
Description added
Following options added:
-R <linker symbol file name>
--relax (gcc4 ld only)
Description revised
Revised to the following:
In addition to debugging programs using the ICDmini
(S5U1C17001H), the debugger incorporates a
software simulator function for debugging programs
on a personal computer.
Description revised
"Selecting connect mode" description revised
Description revised
"Loading/executing a command file" execution
methods corrected from two ways to three ways