Setting Assembler Options - Epson S5U1C17001C Manual

3.4.6

Setting Assembler Options

Set the assembler command options as follows:
Select C/C++ Build > Settings > [Tool Settings] > [Cross GCC Assembler] from the [Properties] dialog box and set the assembler
command options. For more information on options, refer to Chapter 6, "Assembler."
Note: When the IDE assembles the assembler source, the assembler is launched using xgcc (-c
-xassembler-with-cpp option specification) to process using the C preprocessor.
 General

[Assembler flags] (default: -B${GCC17_LOC} –c –mpointer${GCC17_POINTER} –x assembler-with-cpp
–Wa,--gstabs)
Assembler flags can be added.
[Include paths] (default: ../inc）
Set the search path for the include file.
S5U1C17001C Manual
(Rev. 1.0)
Seiko Epson Corporation
3 GNU17 IDE
3-13