Sconv32.Exe - Epson S5U1C17001C Manual

10.5 sconv32.exe

10.5.1 Function
The sconv32 is a tool to convert a Motorola S format into another S format. In an application development for the S1C17 Family,
sconv32 is used to convert the Motorola S3 format SAF file (ROM data) generated by moto2ff into the Motorola S2 format.
The file should be processed with winmdc17 to generate the PA file (Data to be submitted) to be ultimately submitted to Seiko
Epson after verifying program operation on the actual target board using the PSA file (ROM data). For more information on the PA
file generation procedure, refer to Section 9.2, "Procedure for Creating Data to Be Submitted".
10.5.2 Input/Output Files
Input file
 SAF file

File format: Motorola S3 format file
File name: <filename> .saf
Description: A Motorola S3 format file generated by moto2ff.
Output file
 PSA file

File format: Motorola S2 format file
File name:
<filename> .psa
Description: The Motorola S2 format file converted form the input file.
10.5.3 Startup Format
sconv32 S2 <input file name> <output file name>
S2: This is a switch to convert the input file into the Motorola S2 format.
Specify a SAF file generated by moto2ff.
<input file name> :
<output file name> : Specify the output file name that will be converted into the Motorola S2 format.
The file extension must be ".psa".
•
Usage will be displayed when no parameters are specified.
•
If the output file already exists, it will be overwritten.
•
When an error occurs, an error message is output to the standard error device and the output file is not generated.
•
The [Esc] key can be used to forcibly terminate the process while converting.
•
When sconv32 has completed successfully, the following message is displayed.
Sconv32 : Convert Completed. End message
*1: Output to the standard output
S5U1C17001C Manual
(Rev. 1.0)
*1
Seiko Epson Corporation
10 Other Tools
10-11