Rcd / Elcb (Option); Safety Prop; Fall Restraint Lanyard Anchor Points; Non-Slip Tread Grip - Snorkel S3970BE Operation Manual

n RCD / ELCB (Option)
Figure 7.30 - RCD / ELCB
The RCD (Re sid ual Cur rent De vice) is lo cated at
the ground and will pro tect against short cir cuits to
earth. When there is a short cir cuit the RCD will
shut down the 230v AC power to the plat form
outlet.
To re set the out let dis con nect the power tool lead
from the plat form box and re set the RCD at the
ground.
If the prob lem per sists call a trained ser vice tech ni -
cian.
n Safety prop
Figure 7.31 - Safety Prop
In spect the safety prop(s) to see that it is pres ent
and moves freely.
S3970RT, S3370RT & S2770RT – 13865-1
7. Daily Inspection and Maintenance
n Fall Restraint Lanyard Anchor Points
(Option)
Check all four (4) of the Fall Re straint an chor ages
o n t h e f l o o r o f t h e p l a t f o r m f o r t h e
S3970RT/S3370RT, and all six (6) of the Fall Re -
straint an chor ages on the floor of the plat form for
the S2770RT to see that they are pres ent, not de -
formed, that they move freely, and that they are se -
curely at tached to the plat form.
n Non-Slip Tread Grip
Figure 7.32 - Non-Slip Grip Strip
Check that the non-slip pro tec tive strip is in place
and in good con di tion
n Wrist Support
Figure 7.33 - Wrist Support
Check the con di tion of the rub ber on the up per con -
trol box wrist sup port. Re place it if it is worn or dam -
aged.
Rev A page 7 - 9