Daily Inspection And Maintenance; Daily Inspection And Maintenance Table - Snorkel S3970BE Operation Manual

At the start of each work day (or 8 hour shift), the
ma chine qual i fied op er a tor must per form the Daily
In spec tion and main te nance (or Pre-Op er a tion In -
spec tion as it is some times re ferred to), as listed in
the ta ble be low.
The pur pose of the Daily In spec tion and Main te -
nance is to keep the S3970RT / S3370RT /
S2770RT in proper work ing con di tion and to de tect
signs of mal func tion at the ear li est pos si ble time.
This chap ter shows how to per form the in spec tion
and main te nance re quired for each item in the daily
in spec tion and main te nance ta ble. The machine
should be in the STOWED POSITION and the
n Daily Inspection and Maintenance Table
Item
Rough terrain scissor interlock tests
Fuel level
Fuel filter (diesel engines only)
Fuel leaks
Engine oil
Engine coolant
Radiator cap
Swinging gate
Wiring harnesses and connectors
Battery terminals
Battery fluid level
Hydraulic tank cap
Hydraulic oil level
Hydraulic oil leaks
Tires and wheels
Bolts,fasteners and pin keepers
Structural damage, corrosion and welds
Guardrails
Lanyard anchorages (option)
Bubble level at base
Guides, rollers and slides
Non slip tread grip
Wrist support
Operator manual
Placards, decals, and Operators Manual
Air filter
Ground controls
Emergency lowering
Platform controls
Flashing light
RCD / ELCB (option)
Safety prop
Parking brakes
S3970RT, S3370RT & S2770RT – 13865-1
START THE ENGINE FROM THE GROUND CONTROL BOX

7. Daily Inspection and Maintenance

Mas ter Key Switch set to OFF be fore you be gin this
in spec tion.
De fec tive parts and/or equip ment mal func tions
jeop ar dize the safety of the op er a tor and other per -
son nel, and can cause dam age to the ma chine.
The potential for an accident increases when
operating a machine that is damaged or
malfunctioning. Death or serious injury can
result from such accidents. Do not operate a
machine that is damaged or malfunctioning.
Service Required
Perform the tests to ensure the system is functioning
Visually inspect
Visually inspect (condition)
Visually inspect (hoses and connections etc)
Check oil level (between dipstick lines)
Check fluid level and radiator hoses
Visually inspect installation)
Visually inspect (installation, operation)
Visually inspect (installation, operation)
Visually inspect (no corrosion)
Visually inspect (covers plates)
Visually inspect installation)
Check fluid level (at line on side of tank)
Visually inspect (hoses,tubes)
Visually inspect (condition)
Visually inspect (looseness)
Visually inspect (welds, cracks, dents, corrosion)
Visually inspect (condition)
Visually inspect (condition)
Visually inspect (condition)
Visually inspect (condition)
Visually inspect (condition)
Visually inspect (condition)
Visually inspect (that the manual is in the holder)
Visually inspect (installation and condition)
Check condition
Actuate and visually inspect for operation
Check operation (causes correct motion)
Actuate and visually inspect for operation
Visually check (operation)
Check operation
Check operation
Check operation
Rev A
DANGER
page 7 - 1