Snorkel S3970BE Operation Manual page 54

Figure 8.6
1. Set the Battery switch  to on (see Figure
8.6).
Figure 8.7
2. Set the Emergency Stop switch € to on
(out) (see Figure 8.7).
3. Set the Ground/Platform Selector switch 
to platform (up) (see Figure 8.7).
4. Enter the platform and close the gate.
Figure 8.8
6. Turn the Emergency Stop switch ‚
clockwise and it will pop out (on) (see Figure
8.8).
S3970RT, S3370RT & S2770RT – 13865-1
7. Press the Glow Plug switch ƒ down and
hold, for no lon ger than 20 sec onds, then
re lease it just be fore start ing the en gine for
an en gine that is at am bi ent air tem per a ture
(a cold engine). (see Figure 8.8).
8. Press and hold the START switch „ down
until the engine starts or for 20 seconds,
whichever comes first. When the engine
starts, release the START switch „ (see
Figure 8.8).
If the engine does not start in 20 seconds,
release the START switch „ then wait 60
seconds before trying to start the engine
again with the GLOW-PLUG ƒ and START
switches „.
Rev A
8. Operation
CAUTION
page 8 - 3