Connect To The Network; Set A Password On Initial Phone Boot Up; Sign Into Your Extension From Another Phone (Extension Mobility) - Cisco 6800 Series User Manual

Connect to the Network

Procedure
Step 1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2
Rotate the tab 180 degrees.
Step 3
Hold the tab between two fingers, with the corner notches facing you.
Step 4
Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5
Return the handset to the handset rest.
Connect to the Network
You need to connect the phone to the telephone network.
• Wired connection—The phone is plugged into the network using an Ethernet cable.

Set a Password on Initial Phone Boot Up

The first time your phone boots up, you may be prompted to set a password. If you are not prompted, your
administrator has created a password for you.
Procedure
Step 1
Enter your password in the New password and Reenter new password fields.
Step 2
Press Save.
Sign into Your Extension from Another Phone (Extension
Mobility)
If extension mobility is configured, you can sign into a different phone in your network and have it act the
same as your phone. After you sign in, the phone adopts your personal directory number.
Before you begin
Your administrator configures provisioning authority.
Procedure
Step 1
Press Sign in.
Step 2
Enter your username and password, then press Sign in.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
6
Your Phone