Key Expansion Module Buttons And Hardware; Find Information About The Key Expansion Module Of Your Phone - Cisco 6800 Series User Manual

Accessories

Key Expansion Module Buttons and Hardware

The following table describes the features of the key expansion module.
1
2
3

Find Information about the Key Expansion Module of Your Phone

Your administrator may ask for information about the key expansion module that is added to your phone.
This information uniquely identifies the key expansion module for troubleshooting purposes.
LCD screens—Displays the phone number, name, and icon. Icons indicate the line status and
the phone service assigned on that line.
Lighted buttons—14 buttons. Each button corresponds to one line (same as on the phone). The
lights beneath each button indicate the state of the corresponding line as follows:
• light off—Button is not configured.
• green steady—Line is configured correctly, registered successfully, and is in idle state.
• red steady—Line is in use and has an active call on it or has one parked call.
• amber steady/blinking—A configuration error occurred when this feature was being
set up.
Page buttons—2 buttons. The button for page 1 is labeled as 1 and the button for page 2 is labeled
as 2. The lights in each button indicate the state of the page as follows:
• green steady—Page is in view.
• light off—Page is not in view.
• amber steady—Page is not in view but has one or more alerting calls on the page.
Key Expansion Module Buttons and Hardware
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
85