New And Changed For Firmware Release 11.1(1); Phone Setup; Adjust The Handset Rest - Cisco 6800 Series User Manual

Your Phone

New and Changed for Firmware Release 11.1(1)

Feature
Call Center Support
Call Recording
Contrast Adjustment Enhancement
Power Save Support
Presence

Phone Setup

Typically, your administrator sets up your phone and connects it to the network. If your phone is not set up
and connected, contact your administrator for instructions.

Adjust the Handset Rest

If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the
handset rest to ensure that the receiver does not slip out of the cradle.
Figure 2: Adjust the Handset Rest
New and Changed for Firmware Release 11.1(1)
New or Changed Sections
Call Center Features, on page 52
Record a Call, on page 51
Adjust the Phone Screen Contrast, on page 76
Set up Power Save, on page 78
Instant Message and Presence Contacts, on page 58
Change Your Presence State, on page 59
Make a Call to an IM and Presence Contact, on page
58
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
5