Avery Dennison SNAP 700 User Manual page 54

54
All manuals and user guides at all-guides.com
shaped holder. Note the location of the pressure spring to reassemble the
knife. The Gold color spring is on the inboard end and the Light Blue spring
is on the outboard end of the assembly.
8. Remove the Bridge Blade, Knife Output from the Stationary Knife by
removing the two 8-32 x ¼ BHCS.
9. Re-Install this Bridge Blade onto the new Stationary Knife.
10. Properly dispose of the used knife blades.
Caution: Do not mix new and used knife blades as they
will cause premature ware and shorten their life. A chip or
a nick in the blades may damage a new blade on start up.
Light Blue
Spring
User's Manual—SNAP™ 700 Printer
Gold Spring