Printing; Handling The Leader; Errors - Avery Dennison SNAP 700 User Manual

30

3.3.2 Printing

3.3.3 Errors

All manuals and user guides at all-guides.com
Figure 11. Control Panel
Once a print job has been sent to the printer, the Data light will come on. You
can then press the Start/Stop Button to start printing.
When printing starts, the stacker will move the platform to the correct position.
Then the printer will start printing labels.
As the printer prints, the cut labels will drop onto the top of the stack. As the
stack grows, the stacker platform moves down so that the top of the stack stays
in the same position.

3.3.2.1 Handling the Leader

When you start printing for the first time, or after some errors, the printer will
create a leader. The leader is a longer piece of material that may be blank or may
have some partially printed labels. These labels are not usable and are not part
of the print job.
When the printer creates a leader, grab it as it comes out of the nip rollers and
pull it out of the stacker when the printer does the first cut. (If you are not using
the stacker, or you are using some other accessory such as a Rewinder or Looper,
you may need to handle the leader differently.)
If the printer encounters a problem during printing, it will stop printing and
either the Supply or Error light will come on. The Supply light means that there
is a problem with either the ink or the stock, or the stacker is full. The error light
means that there is some other problem with the printer.
There are three ways to determine what the problem is:
1. Press the Voice button. A message will play that describes the problem.
2. The problem will be displayed in the Printer Status box on the Virtual
Control Panel in PCMate Platinum. See section 8.0 for a description of the
Virtual Control Panel.
Correct the problem and press the Start Button to start printing again.
NOTE: If the error condition no longer exists, the printer
will start. It is not necessary to press the Start button
twice as is required with previous AVERY DENNISON
printer models. If the error continues to recur, contact
your local AVERY DENNISON representative.
User's Manual—SNAP™ 700 Printer