Inspection / Inventory Checklist - Avery Dennison SNAP 500 User Manual

User's Manual—SNAP™ 500 Printer

2.3.2 Inspection / Inventory Checklist

All manuals and user guides at all-guides.com
CAUTION: Do not discard any of the packing / shipping
material in case you have to move the printer to another
location or return it to AVERY DENNISON for service.
3. Open the plastic covering protecting the printer.
4. Position your left hand in the foam cutout above the tape arbor. Grasp the
lower stacker-mounting shaft. Carefully lift it out of the box, and place the
printer on the workstation table.
5. Turn the Tape Arbor knob clockwise and remove the protective foam behind
the Tape Arbor.
6. Unpack the stacker from its box and place it on the workstation table next to
the printer. Refer to Section 2.5.1, Attaching the Stacker.
Figure 2. Shipping Carton
1. Inspect the printer for any damage that may have occurred as a result of
shipping.
2. Check the AVERY DENNISON SNAP 500 printer shipping carton to be sure
the following items are also included with your printer.
Top Foam Packing Layer
Poly Bag Covering
Carton
Band Strap – International
Only
International Shipping Blocks
13