Hyundai GENESIS COUPE BK 2010 Manual page 133

4. Install the connecting rod bearings.
(1) Align the bearing claw with the groove of the connecting rod or connecting rod cap.
(2) Install the bearings(A) in the connecting rod and connecting rod cap(B).
When reassembling the connecting rods and the caps, ensure the front marks on them and the number of
cylinder.
5. Install the main bearings.
Upper bearings have an oil groove of oil holes; Lower bearings do not.
(1) Align the bearing claw with the claw groove of the cylinder block, push in the 4 upper bearings(A).
(2) Align the bearing claw with the claw groove of the main bearing cap, and push in the 4 lower bearings.