Table of Contents
Advertisement
GENESIS COUPE(BK) > 2010 > G 3.8 DOHC > Body Electrical System
Body Electrical System > General Information > General Information
General Troubleshooting Information
Before Troubleshooting
1. Check applicable fuses in the appropriate fuse/relay box.
2. Check the battery for damage, state of charge, and clean and tight connections.
(Refer to the Engine Electrical System - Battery)
• Do not quick-charge a battery unless the battery ground cable has been disconnected, otherwise you will
damage the alternator diodes.
• Do not attempt to crank the engine with the battery ground cable loosely connected or you will severely
damage the wiring.
3. Check the alternator belt tension.
Handling Connectors
1. Make sure the connectors are clean and have no loose wire terminals.
2. Make sure multiple cavity connectors are packed with grease (except watertight connectors).
3. All connectors have push-down release type locks (A).
4. Some connectors have a clip on their side used to attach them to a mount bracket on the body or on another
component. This clip has a pull type lock.
5. Some mounted connectors cannot be disconnected unless you first release the lock and remove the connector from
its mount bracket (A).
- Quick Links:
- Electrical System
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
