Hyundai GENESIS COUPE BK 2010 Manual page 70

cylinder head and cylinder block.
The part must be assembled within 5 minutes after sealant was applied.
Bead width : 2.5mm(0.1in.)
(3) After applying liquid sealant TB1217H on timing chain cover. The part must be assembled within 5 minutes
after sealant was applied.
Sealant should be applied without discontinuity.
(4) Install the new gasket (A) to the timing chain cover.
During timing cover installation, care not to take off applied sealant on the timing cover by contact with
other parts.
(5) The dowel pins on the cylinder block and holes on the timing chain cover should be used as a reference in