Table of Contents
Advertisement
Inspection
Sprockets, Chain Tensioner, Chain Guide, Chain Tensioner Arm
1. Check the camshaft sprocket and crankshaft sprocket for abnormal wear, cracks, or damage. Replace as necessary.
2. Inspect the tensioner arm and chain guide for abnormal wear, cracks, or damage. Replace as necessary.
3. Check that the tensioner piston moves smoothly when the ratchet pawl is released with thin rod.
Installation
1. The key (A) of crankshaft should be aligned with the timing mark (B) of timing chain cover. As a result of this, the
piston of No.1 cylinder is placed at the top dead center on compression stroke.
2. Install the tensioner adapter assembly (A).
3. Install the crankshaft sprocket (A). (LH camshaft drive).
- Quick Links:
- Electrical System
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
