Hyundai GENESIS COUPE BK 2010 Manual page 76

27. Install the drive belt (A).
Tightening torque :
18.6 ~ 22.5N.m (1.9 ~ 2.3kgf.m, 13.7 ~ 16.6lb-ft)
28. Install the LH/RH cylinder head cover (A).
• Install the cylinder head cover under the exhaust OCV cap is removed.
• To prevent engine oil leakage, surely install the new exhaust OCV cap after installing the cylinder head
cover.
(1) Remove the exhaust OCV cap (A) from the cylinder head cover.
(2) The hardening sealant located on the upper area between timing chain cover and cylinder head should be
removed before assembling cylinder head cover.
(3) After applying sealant(TB1217H), it should be assembled within 5 minutes.