Windshield wiper system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Wiper motor, removing from
frame
- Lever both linkages -1- from
crank using pry lever 80-200 .
- Remove hex nut -2-.
- Remove crank.
- Remove three mounting bolts -3-.
- Remove motor from frame.
Wiper motor, installing in frame
- Ensure wiper motor is in park
position by briefly connecting
electrical connection to wiper
motor, and operating wiper
switch.
- Disconnect electrical connection,
insert wiper motor into frame and
tighten three mounting bolts.
Tightening torque: 8 Nm
- Install crank onto wiper motor
shaft, aligning the linkages so that
they are in-line as illustrated.
Página 8 de 18
92-8
13/2/2005