Compressor bracket, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
A/C clutch -N25- (Zexel), removing
and installing.
Fig. 1
Clutch plate bolt,
removing
- Remove bolt
Tightening torque: 15 Nm (11
ft. lb.)
When removing and installing bolt,
counter-hold with two-hole pin
wrench -A- (3212 or equivalent with
4 mm pins).
Fig. 2
Clutch plate, removing
- Mount VAG 1719 and turn in
center bolt to extract clutch plate.
When removing, counter-hold with
two-hole pin wrench -A- (3212 or
equivalent with 4 mm pins).
Página 33 de 35
87-170
13/2/2005