Description of work (part 2 of 2)
housing and latches - 1 - and secure the frame with filter
element by pushing down.
- Install the plenum chamber cover and fasten with 4
screws - 2 - .
- Press on rubber seal - 1 - .
Air cleaner, clean housing and replace filter
element
Note:
Depending on vehicle equipment, there is a screen built
into the area of the intake canal. This screen prevents
snow and ice from entering the air filter housing and
clogging the air filter during winter months. If dirty, the
screen should be blown clean with pressurized air.
All engines
Perform the following work sequence:
Removing:
- Remove fastening bolts - arrows - .
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Página 27 de 59
13/2/2005