Radio system - Premium VI (including Monsoon) from 12.01, On Board Diagnos...
No DTC recognized!
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
HELP
If "No DTC recognized" is displayed,
the program will return to the initial
position after pressing
Indicated on display (select
function):
If display not indicated as shown:
Scan tool operating instructions
- End output (function 06)
01-48
.
- Switch off ignition and disconnect
Data Link Connector (DLC).
Note:
If DTCs were recognized, follow the
sequence below:
- 1. Correct malfunction.
- 2. Erase Diagnostic Trouble Code
(DTC) memory (function 05).
- 3. Check Diagnostic Trouble Code
(DTC) memory (function 02).
Página 11 de 29
01-37
button.
Page
13/2/2005