Antenna cables, replacing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
- Remove interior trim as necessary
Manual, Body Interior, Repair Group 68
- Overlay and install replacement antenna cable
section parallel with old cable.
CAUTION!
Antenna cable must not be kinked or bent
excessively during installation. Do not
attempt to bend antenna cable in a radius
smaller than 50mm.
- Connect replacement antenna cable sections as
required.
- Reinstall interior trim as necessary
Manual, Body Interior, Repair Group 68
- Perform functional test of radio/antenna
system.
Página 4 de 4
97-20
Repair
and 70.
Repair
and 70.
13/2/2005