Headlights - Golf
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Headlight beam adjusting motor,
removing and installing
Notes:
Headlight beam adjusting where applicable.
Beam adjusting motor can only be removed and
installed with headlight housing removed.
If positioning motors are removed and installed
or replaced, always carry out headlight basic
setting with VAS 5107 Optical headlight aimer.
Inclination dimension is embossed on headlight
housing.
Removing
- Remove headlight
- Release spring clip -arrow- and remove sealing
cover.
- Disconnect electrical connector.
Página 18 de 20
94-16
Page 94-4
.
13/2/2005