Volkswagen Golf 1999 Service Manual page 4847

Description of work (part 1 of 2)
- Then, perform the vehicle identification procedure on the
diagnostic tester.
- Select "Instrument cluster" on the display.
- Select "Adapting language for Navigation" on the display.
- Confirm the selection by pressing the right arrow.
- Select the appropriate language and confirm with "Yes" .
- Complete the language adaptation by pressing the "Go
to" and "End" buttons.
- Switch ignition off.
Power windows, 8-way memory seat,
perform initialization (activation)
Power windows, perform initialization
Note:
Automatic opening and closing features for power windows
do not function after disconnecting battery. Therefore,
power windows must be reinitialized before a new vehicle
is delivered. Do not disconnect battery again after
initialization of power windows.
Warning!
After disconnecting and connecting the battery the
excess force limitation function of the power windows
does not function. This can cause serious injuries if
e.g. fingers are caught in the window!
Make sure the customer is aware of this!
Perform the following work sequence to initialize the
electric windows:
- Lock all doors completely.
- Lock the vehicle doors from the outside, either at the
driver or passenger front door..
- Unlock vehicle.
- Lock the vehicle doors again from the outside, either at
the driver or passenger front door.. Hold the key in the
locking position for at least 1 second.
8-way memory seat, perform initialization
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Página 2 de 50
13/2/2005