Description of work (part 2 of 2)
- Install vacuum reservoir bracket - 1 - and tighten screws -
arrows - .
- Install vacuum reservoir - 1 - and tighten hex nut - - arrow
- .
- Place engine cover and tighten screws - arrows -
Engine code BDF
- Remove engine cover - 1 - upward.
- Release ignition coil connector - 1 - at ignition coil - 2 -
and remove.
- Remove ignition coils using Puller T10095 .
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Página 20 de 59
13/2/2005