Volkswagen Golf 1999 Service Manual page 4752

CD Changer / CD Player
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
CD Changer position (V/H)
switches, setting
- Check and confirm CD Changer
position settings via V/H switch
(or switches) -arrow- where
applicable.
- Loosen V/H switch retaining
screw, slide switch towards the
appropriate position according to
CD Changer's installation position
("V" = vertical, or "H" = horizontal)
and tighten.
Tightening torque: 3 Nm (27 in
lb)
Notes:
CD playback will skip if switches
are not set correctly.
Always check/set switches prior
to CD installation.
Switches must move completely
to their end positions.
Before sliding CD Changer into
CD Changer bracket ensure that
the CD Changer cable and
conector route to the front side of
the CD Changer.
Página 5 de 10
91-60
13/2/2005