Volkswagen Golf 1999 Service Manual page 4870

Description of work (part 1 of 2)
- Check the angle setting.
Driver side
Passenger side
Rear wiper
Tolerance
If necessary, adjust angle setting to specified value as
follows:
- Apply 24 mm open end wrench - 1 - on adjustment device
and set wiper arm - 2 - to specified value - arrows - .
- Release wiper arm - 2 - from adjustment fixture and again
tighten lock screw - 3 - .
- Compare adjusted value with specified value. If necessary
repeat procedure until specified value is reached.
- Remove adjustment fixture and reinstall wiper blade.
- Check wiper blade for pulsation-free operation.
Transportation wiper blades, removing at
vehicle delivery
Service
For all Models arriving at your dealership with
transportation wiper blades:
Transportation wiper blades are shorter than original
equipment wiper blades and colored blue or yellow.
Original equipment blades are temporarily installed during
Perfect Delivery Inspection to check wiper blade park
position.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Angle setting (specified values) for
Left-hand drive vehicles
- 8.5
- 1.0
0
2
Página 25 de 50
13/2/2005