Telematics
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
- Select "Telematics NAR"
- Select "Functions - Telematics NAR" and press
">" to confirm.
- Select "check DTC memory - Telematics
NAR".
No DTCs must be present.
- Check and confirm the green telematics
indicator lamp in Telematics Control Head is on.
- Exit operating mode "Guided Fault Finding".
- Disconnect VAS 5051 from DLC.
Reconfiguration
- Drive vehicle outside to area away from tall
buildings, and with no overhead obstructions
(trees, bridges, etc.).
-
Press the blue OnStar
recorded introduction will be heard.
-
Press the "On
" button again at any time
during the recording (it is not necessary to wait
for the recording to finish).
- When an OnStar call center advisor answers,
identify yourself as an Volkswagen Technician,
and that you have replaced the "Vehicle
Communications Interface Unit (VCIM)".
- Supply advisor with STID number and ESN from
new module. Supply the VIN and customer
details if necessary. The advisor will guide you
through the system reconfiguration and update
of the customer's account.
Página 27 de 35
("On
") button. A
13/2/2005
91-98