Volkswagen Golf 1999 Service Manual page 4852

Description of work (part 1 of 2)
- Install full wheel cover with tire valve positioned in the cut-
out - arrow - .
Installation tool for wheel cover (Golf GTI 337 Edition)
- Place the wheel cover installation tool in the vehicle tool
kit, as shown in the illustration - arrow - .
Wheelhousing liner, bolting to front apron
(only anniversary Golf GTI with 132 kW
engine)
Note:
The wheel house lining must be fastened to the front apron
by an additional fixing bolt. This will help prevent damage
to the wheel house lining.
The following illustration shows the right wheel house
lining. The fastening of the left wheel house lining is the
same but reversed.
The fastening - 1 - in the illustration was performed by the
factory.
Necessary material:
2 x "N 015 439 1" spring nut
2 x "N 907 750 01" Torx socket head self-tapping screw
(4.8 x 16)
Work sequence for the additional fastener - 2 - :
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Página 7 de 50
13/2/2005