Interior lights and switches
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Instrument Panel Light Dimmer/Switch
E20-, removing and installing
Note:
European-only market dimmer/switch that
includes manual headlight beam adjuster is
illustrated here. Procedure is the same for
USA/CDN models.
Removing
CAUTION!
Before beginning repairs on the electrical
system:
Switch off all electrical consumers.
Switch ignition off and remove ignition
key.
- Apply tape to instrument panel in area around
switch in order to protect instrument panel.
- Carefully pry out switch housing from installation
frame using screwdriver as illustrated.
- Pull out switch and disconnect electrical
connector.
Installing
- Connect electrical connector.
- Insert headlight adjuster in guide on mounting
frame and press in.
Página 2 de 27
96-2
13/2/2005