Avaya 3500 Series Getting Started page 50

Configuring Telnet
Variable
<A.B.C.D > | <dns_host_name> | <WORD>
datasize<64–4096>
{count <1–9999>} | continuous
{timeout |-t} <1–120>
interval<1–60>
debug
source<A.B.C.D>
ttl<0–255>
Getting Started with Avaya ERS 3500 Series
50
Value
Specifies the IP address, DNS host name, or IPv6
address of the unit to test.
Specifies the size of the ICMP packet to be sent. The
data size range is from 64 to 4096 bytes.
Sets the number of ICMP packets to be sent. The
continuous mode sets the ping running until the user
interrupts it by entering Ctrl-C.
Sets the timeout using either the timeout or -t
parameter, followed by the number of seconds the
switch must wait before timing out.
Specifies the number of seconds between
transmitted packets.
Provides additional output information such as ICMP
sequence number and trip time.
Specifies the source IP address of the packet. Must
be a configured address on the switch.
Specifies the maximum hop limit for the packet.
Range of 0 to 255.
Comments on this document? infodev@avaya.com
July 2015