Avaya 3500 Series Getting Started page 154

Ethernet routing switch
Hide thumbs Also See for 3500 Series:
Table of Contents

Advertisement

ERS 3500 hardware features and VLAN configuration procedures
3500 Series Switch Model
ERS 3550T
ERS 3550T-PWR+
ERS 3550T/T-PWR+ Hardware specifications
The ERS 3500T/3550T-PWR+ model switch consists of 48 ports of Fast Ethernet with two Gigabit
SFP ports, and two SFP based stacking ports which enables stacking with other ERS 3500's and
allows to connect to Gigabit trunks.
ERS 3550T/T-PWR+ Features and specifications
ERS 3550T
General Features:
48x 10/100 RJ45 User Ports (ports 1 - 48)
2x combo 10/100/1000 RJ45 or SFP Ports (ports 49
& 50)
2x 2.5Gbps SFP rear stacking ports
2x Broadcom BCM56146 (Hurricane-1) Switch Chips 2x Broadcom BCM56146 (Hurricane-1) Switch Chips
6x Broadcom BCM52681 10/100 PHYs
1x Broadcom BCM5482S CuGE/SFP combo PHY
50W Internal Power Supply
Dimensions:
Width: 442mm (44.2cm) (19" rack compatible)
Depth: 380mm (38cm)
Height: 44.45mm (1 Rack Unit)
Supported Hardware components:
An internal 90W AC power supply
One Kensington Lock slot at the rear panel
One RJ-45 RS-232 Console connection at the front
panel
4-wire fans
Rack mount holes for 19" mounting
Rear Unit Select switch for setting as Base Unit in a
stack
Getting Started with Avaya ERS 3500 Series
154
Key Features
48 10/100 Ethernet and 2 combo 10/100/1000/SFP, plus 2 rear dual
mode / stacking ports.
48 10/100 Ethernet 802.3at PoE+ and 2 combo 10/100/1000/SFP, plus 2
rear dual mode / stacking ports.
ERS 3550T-PWR+
48x 10/100 RJ45 User Ports (ports 1 - 48)
2x combo 10/100/1000 RJ45 or SFP Ports (ports 49
& 50)
2x 2.5Gbps SFP rear stacking ports
6x Broadcom BCM52681 10/100 PHYs
1x Broadcom BCM5482S CuGE/SFP combo PHY
All front RJ45 ports support full power 802.3at PoE+,
utilizing 6x Broadcom BCM59111
PoE+ support with a 525W power supply to support
a PoE+ budget of ~ 370W.
Width: 442mm (44.2cm) (19" rack compatible)
Depth: 380mm (38cm)
Height: 44.45mm (1 Rack Unit)
An internal 525W AC power supply to supply power
needs for the main system and PoE+
One Kensington Lock slot at the rear panel
One RJ-45 RS-232 Console connection at the front
panel
4-wire fans
Rack mount holes for 19" mounting
Rear Unit Select switch for setting as Base Unit in a
stack
Comments on this document? infodev@avaya.com
July 2015

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents