Avaya 3500 Series Getting Started page 102

Managing Ethernet ports using ACLI
Variable
port <portlist>
asymmetric | auto | disable
no
default
Getting Started with Avaya ERS 3500 Series
102
Value
Specifies the port numbers to use for flow control
Sets the mode for flow control:
• asymmetric — enables the local port to perform
• auto — enables auto-negotiation on the specified
• disable — disables flow control on the port
DEFAULT:auto
Disables flow control on the specified port(s).
Sets the flow control to auto, which automatically
detects the flow control on the specified port(s).
Comments on this document? infodev@avaya.com
Important:
If you omit this parameter, the system uses the
port number you specified in the interface
command.
flow control on the remote port
port and flow control status will be determined after
the auto-negotiation process completes, depending
on the currently activated auto-negotiation
advertisements
July 2015