Avaya 3500 Series Getting Started page 130

Configuring the switch using EDM
Name
TftpServerInetAddress
BinaryConfigFileName
ImageFileName
FwFileName(Diagnostics)
Action
Status
Getting Started with Avaya ERS 3500 Series
130
Description
Specifies the IP address of the TFTP server on
which the new software images are stored for
download.
Specifies the binary configuration file currently
associated with the switch.
Specifies the name of the image file currently
associated with the switch. You can change this
value to the name of the software image to be
downloaded.
Specifies the name of the diagnostic file currently
associated with the switch. You can change this field
to the name of the diagnostic software image to be
downloaded.
Specifies the actions taken during this file system
operation. The available options are:
• other
• dnldConfig: downloads a configuration file to the
• upldConfig: uploads a configuration file to a
• dnldImg: downloads a new software image to the
• dnldImgIfNewer: downloads a new software
• dnldImgNoReset: downloads a new software
• dnldFw: downloads new firmware to the switch.
• dnldFwNoReset: downloads new firmware to the
Displays the status of the last action that occurred
since the switch last booted. Values include:
• other: no action occurred since the last boot.
• inProgress: the selected operation is in progress.
• success: the selected operation succeeded.
• fail: the selected operation failed.
Comments on this document? infodev@avaya.com
switch. The new configuration file is implemented
on the next switch boot cycle.
server from the switch. The configuration file
contains the current switch MIB object value.
switch.
image to the switch only if it is newer than the
image currently saved on FLASH.
image to the switch, but does not reset the switch
when the download is complete.
switch, but does not reset the switch when the
download is complete.
July 2015