Example
The following figure provides a sample output of the show poe-main-status command showing
PoE power mode settings.
PoE Main Status - Stand-alone
--------------------------------------------------
Power Mode
Available DTE Power
DTE Power Status
DTE Power Consumption
DTE Power Usage Threshold
PD Detect Type
Power Source Present
AC Power Status
DC Power Status
Variable definitions
The following table describes the parameters for the poe power-mode command.
Variable
low-power-budget | high-power-budget
default
Displaying PoE power mode
Use the following procedure to display the PoE budget operating mode for the ERS 3510GT-PWR+
switch. There are 2 power budget modes; low (Fanless) or high (Normal).
The default is: high power budget mode (Normal mode, fan operates).
Procedure
1. Enter Privileged EXEC mode:
enable
2. At the command prompt, enter the following command:
show poe-main-status
July 2015
: Low Power Budget
: 60 Watts
: Normal
: 0 Watts
: 80 %
: 802.3at and Legacy
: AC Only
: Present
: Not Present
Value
Specifies the power budget mode:
• low-power-budget — for fanless mode
• high-power-budget — for normal mode
DEFAULT — high-power-budget (normal mode)
Resets the power mode to the default value —
normal mode (high-power-budget)
Comments on this document? infodev@avaya.com
Displaying PoE power mode
Getting Started with Avaya ERS 3500 Series
109